Bestop TrekStep Truck Bumper Step Installation - 2023 Ford F-150- Video

How's it going, neighbors This is Ed here with etrailer.com, and we're taking a look at the Bestop TrekStep on our 2023 Ford F-150. The TrekStep is a great solution for someone that's looking for a way to get access to their bed easier without a step stool or stepping on your bumper. It is deployable just with your foot so you can kick it in and pull it out without blocking any access to the back of your hitch and giving you a little bit easier access to your bed. The TrekStep is spring loaded, made from extruded aluminum. What that does for you, extruded aluminum, it's gonna be more solid and rigid for holding up weight, so that's actually really good for that. Weight capacity goes up to 300 pounds, and the surface is textured, so I would feel comfortable if this we inchesre my truck to add having this as another add-on. more

Watch Video

2/15/2024 12:29:23 PM

Bestop TrekStep Truck Bumper Step Installation - 2018 Ford F-150- Video

Today on our 2018 Ford F150, we're going to be taking a look at and showing you how to install the Bestop truck step truck bumper step. part number B7530815. Whenever you needed to get something out of the bed of your truck, with the tailgate down, it makes it a lot more difficult to get in there. We're either going to have to lift our leg up all the way up to the bumper or possibly sit on the tailgate and turn in, but our step is going to make it a lot easier. It's a spring loaded step that's going to come out beneath our bumper, so we can get in the bed a lot easier and safer.The nice thing about the step is that it is going to work with the tailgate down or up. Even if the tailgate's up, we can still use the bumper as a step and feel a little more confident when getting in or out of our truck bed, and it's spring loaded, so whenever we're not using it, we can simply just push it up and it'll tuck up nicely against the bumper. more

Watch Video

1/10/2019 1:07:11 PM

Bestop TrekStep Driver Side Truck Bumper Step Installation - 2016 Ford F-250 Super Duty- Video

Speaker 1: Today on our 2016 Ford F-250, we're going to be installing the Bestop TrekStep Truck Bumper Step, part number B75303.When your tailgate's down, it's too hard to step up here. There's not much bumper left to step on, so this way it's easy to hop back in there. Its 11-1/2 x 6-1/2" surface has a nice rough non-slick texture. This is good for those wet days to make it safe to hop in the back. It's got Allen bolts underneath that allows the step to adjust side to side. We've got our adjusted here for the tailgate so when it's down we can still get access to it. more

Watch Video

5/15/2018 4:52:22 PM

Bestop TrekStep Truck Bumper Step Installation - 2016 Ford F-150- Video

Today on our 2016 Ford F-150, we're going to be taking a look at and showing you how to install the Bestop TrekStep Truck Bumper Step, part number B7530815. We've all been in that situation where we have our tailgate down, and we need to get in the back of our truck. Well, with the tailgate down, we no longer have the bumper as an option for a step, but that's where our truck step's going to come in. It's a spring-loaded step, so you made it a lot easier, allowing us to step up and grab the gear that we need out of our truck bed without having to strain. The thing I really like about this step is that you can use with the tailgate up or down, and instead of being a hitch-mounted step, it's going to leave our hitch open for plenty of other accessories. When we're not using it, our step's going to sit up nicely close to our bumper, and whenever we're ready to use it, there's just enough room to get our foot in there and bring it down. The mounting bracket and the linkage on our step are made of a high strength aluminum alloy, and they have a powder coat finish to resist rust and corrosion. Our stepping platform is also made out of aluminum with a nice rugged texture so we know we're going to have a secure footing whenever we're ready. Our step is going to be about 11 and 1/2" wide, by 6 and 1/2" deep. more

Watch Video

7/6/2017 11:12:08 AM

Bestop TrekStep Driver Side Truck Bumper Step Installation - 2008 Ford F-350- Video

Today, on our 2008 Ford F350, we're going to take a look at, and also show you how to install, the Bestop TrekStep. This is an aluminum truck bumper step for the driver's side, part number is B75303. Here's what our step is going to look like installed, nice, clean look here on the back of the truck. We've got complete rust-proof aluminum construction, so we're not going have to worry about, well, like everything else on the truck, eventually salt or moisture gets to it, and it winds up rusted, so not going to have to worry about that with this. It doesn't hang down very far underneath the truck, so unless you're in the habit of sliding your bumper off the mud or something like that, I don't think you'll have any big issue with it getting hung up on anything. To use it, you just step down on it. It's going to bring the step out. It's going to allow us to get up into the bed of our truck pretty safely, pretty easily. more

Watch Video

11/7/2016 2:00:35 PM

Bestop TrekStep Driver Side Truck Bumper Step Installation - 2014 Ford F-350 Super Duty- Video

Today on our 2014 Ford F-350 Super Duty we'll be taking a look at and installing the Bestop TrekStep Truck Bumper Step for the driver side, part number B75303. Use your foot to lower down that step for easy access to your truck bed. It simply bolts to your truck's bumper bracket with no drilling required. When you're all done, it conveniently stores up underneath your truck's bumper. It works great even with the tailgate down. The step itself measures 11 and a half inches long by 6 and a half inches wide. It features textured treading for grip and it has a 300-pound weight capacity. more

Watch Video

11/3/2016 1:09:43 PM

Bestop TrekStep Driver Side Truck Bumper Step Installation - 2013 Ford F-250 Super Duty- Video

Today it's 2013 Ford F250 Super Duty crew cab. We're going to start partner mobile 00:00:05 75303 from dust off 00:00:08. This is a truck bumper step. First thing we're going to do is go ahead and find a location for our mount. We're looking at the driver's side behind the bumper, and we remove these 2 nuts. We need to keep these, because we'll be able to re-use these during the mount inaudible 00:00:24. We'll use a 21-mm socket to go ahead and remove. All right, we'll go ahead and do some sub-assembly now on our step. more

Watch Video

10/20/2014 10:59:16 AM

Convert-A-Ball Accessory Step Truck Bed Accessories Installation - 2001 Ford F-350- Video

Today in a 2001 Ford F-350 Superduty, Crew cab, we're going to install part number CAB-SG. This is a convertible step gate. Alright let's get out of our garage and give it a try. Go ahead and unfold it. Looks like it works pretty good. Now when we don't need this or need some extra clearance at the tailgate, you can go ahead and remove it. more

Watch Video

9/29/2014 9:17:32 AM

  1